Fault treatment and emergency method of motorcycle lock

In our daily life, we often encounter various problems, including the failure of motorcycle locks. Motorcycle, as one of the important tools for people to travel, will inevitably have some minor problems in the use process, such as the motorcycle lock can't be opened and the key is broken inside, which will undoubtedly bring inconvenience to our lives. So, how should we deal with this situation? This paper will introduce the common faults of motorcycle locks and the corresponding emergency solutions for you in detail.

First, the analysis of the reasons why motorcycle locks can't be opened

1. There are foreign objects in the lock core: dust or impurities enter the lock core because the motorcycle lock has not been cleaned and maintained for a long time, which causes the lock core to be blocked.

2. The key is seriously worn: the surface of the key that is often used may be worn to varying degrees. When it is worn to a certain extent, it cannot be completely embedded in the keyhole, thus making the lock unable to be opened.

3. Rust and aging of lock core: If it is not used for a long time or improperly maintained, the motorcycle lock is prone to rust, which will affect the normal use function..

Second, the emergency solution

(1) Remove foreign bodies inside the lock cylinder.

For the case that the lock core can't be opened due to foreign objects in it, we can first blow hot air at the keyhole with a hair dryer to melt the possible grease, and try to gently poke the foreign objects in the keyhole with a slender metal stick to make them out of place. Then, drop a few more drops of lubricating oil and let it naturally flow into the lock cylinder. This operation can generally solve the problem.

(2) Repair the damaged key

If the lock cannot be unlocked normally because the key is damaged, you can try to find a new key of the same model to replace the old damaged parts. Of course, if you don't have a spare key with you, you can also try to cut a short piece of wire with nail clippers and bend it into a suitable shape and insert it into the lock eye to try to turn it; Or use toothpicks to pick out the broken parts, so as to facilitate the replacement of new parts.

(3) Rust prevention and maintenance

In order to avoid the problem that the lock core can't be opened due to rust and aging, the rust prevention work of motorcycle lock should be done well in peacetime. The specific approach is:

① Regularly check the lock body for rust;

(2) adding proper amount of lubricant into the lock body at regular intervals to prevent moisture from invading and causing oxidation reaction;

(3) after the rainy day should be wiped clean in time to avoid residual water droplets to accelerate the corrosion process.

The above is about "What should I do if the motorcycle lock doesn't open?" The related introduction and suggested measures of this problem. I hope I can help you when you encounter such troubles! At the same time, we should also remind everyone that we should pay attention to maintaining our vehicles and equipment regularly to avoid unnecessary losses.

Tags：

Addresses：https://tepinji.com/automaut/4115.html