In-depth discussion: the use and maintenance of printing platform adjustment box lock
I. Preface
With the development of 3D printing technology, more and more people begin to contact and use this technology, and in the process of 3D printing, the role of printing platform adjustment box lock is very important. It can not only ensure the stability and security in the printing process, but also improve the printing efficiency. So, how to use and maintain the lock of printing platform adjustment box correctly?
This article will give you detailed answers.
Second, the definition and function of printing platform adjustment box lock
The lock of printing platform adjustment box is an important part for fixing the position of 3D printer platform. Its main function is to ensure that the platform can remain in a fixed relative position during the printing process, so as to print the model accurately. If the platform position deviates, it may lead to printing failure or defects.
Third, the correct method of use
1. Before use, please check whether the lock of the regulating box is intact, including whether the lock catch is damaged or loose.
2. The operation should be as smooth and gentle as possible to avoid excessive locking or even damage to the equipment itself due to excessive force.
3. When the height of the platform needs to be adjusted, the locking device should be turned on first, then the leveling knob should be slowly turned until the required height, and then the locking mechanism should be closed again to complete the operation steps.
Fourth, regular maintenance measures
In order to prolong its service life and keep it in good condition, the following points should also be paid attention to in daily use:
1. Regularly clean up dust and sundries-you can use a soft brush or a hair dryer to remove surface dust;
2. For the easily worn parts such as screw joints, lubricating oil can be applied to reduce the friction coefficient;
3. If it is found that some parts have obvious signs of aging, they should be replaced with new products in time to avoid affecting the overall performance.
V. Conclusion
In short, mastering the above points in practical application will greatly improve our operation level and effect experience for this kind of equipment! I hope this article can provide you with some reference value and help you better understand and use this important component!
Rec. Prods.
Tags：
Addresses：https://tepinji.com/Machi/4151.html