In our daily life, we often neglect the necessary maintenance of car locks, which will not only affect the safety performance of vehicles, but also cause unnecessary troubles and economic losses. In order to let everyone know the maintenance methods of car locks, this article is specially written.

First, clean the lock cylinder regularly

Because the keyhole is exposed for a long time, it is easy to be contaminated with dust or dirt during use, which affects the smoothness of key insertion and extraction. Therefore, it is necessary to clean the lock hole frequently, and the dirt in the lock hole can be cleaned by using a soft brush; Or use a vacuum cleaner to remove impurities and drop a small amount of lubricating oil to lubricate the internal structure.

Second, apply antirust agent

After driving in rainy days, wash the rain on the door in time and dry the water stains to prevent rust and corrosion; At the same time, a thin layer of anti-rust ointment can be coated on the surface of the lock to enhance its anti-corrosion ability. Be careful not to add too much grease to avoid blocking the opening and closing action. It is recommended to replace it once every six months to one year.

Third, check whether the accessories are loose.

With the increase of mileage, some parts may gradually become loose due to vibration and other reasons. If the handle or button is found to be loose, it is necessary to tighten the screws in time to fix their positional relationship, so as to avoid the failure caused by improper operation.

Fourth, the correct use of keys

Usually, we should try our best to reduce the hard bending and knocking, otherwise it is very likely to damage the internal mechanism and cause damage to the normal opening/closing. In addition, attention should be paid to keeping hands dry to reduce the influence of static electricity on the circuit board.

Five, regularly check the function of electronic parts.

For intelligent products with remote control function, we need to pay special attention to the signal strength: if the distance is too far, we need to adjust the transmission frequency; In case of low battery alarm, it is necessary to replace the new battery in time and other measures to ensure that the normal use effect is not disturbed.

Six, professional maintenance services

When the above conventional treatment methods can't solve the problem, it is recommended to go to the 4S shop for professional help. They have more advanced and complete tools and equipment and rich experience, and can quickly and accurately judge the cause of the fault and give it a reasonable solution.Effective solutions.

In a word, only by paying more attention to the details on weekdays can we better prevent the occurrence probability of various potential risk points, thus ensuring the safety of our own property.

标签：

本文地址：https://tepinji.com/automaut/3016.html