Key points of installation and maintenance of traffic lock
I. Introduction:
In modern cities, with the increase of the number of motor vehicles.
And the traffic pressure increases, the traffic safety problem becomes increasingly prominent. As an important traffic facility, traffic lock plays an important role in ensuring pedestrian safety and alleviating traffic congestion. Therefore, reasonable installation and scientific maintenance of traffic locks are very necessary.
Second, the function of traffic lock:
1. Pedestrian crossing signal lamp: It is usually set at intersections or around schools and other sections with large pedestrian flow, and is used to guide pedestrians to cross the road safely.
2. Isolation guardrail lock: it is mainly used to isolate motor vehicle lanes from non-motor vehicle lanes, ensure vehicles to drive according to lanes, and reduce the probability of traffic accidents.
3. Bus stop sign lock: Ensure that the bus stop sign is firmly and stably fixed on the road surface, which is convenient for passengers to wait and ride.
4. Bicycle parking rack lock: By locking the bicycle rack with the ground, the bicycle can be prevented from being stolen or moved at will.
Three, traffic lock installation matters needing attention:
(1) Strictly follow the design drawings: before construction, carefully check the drawings and adjust the implementation plan according to the actual environmental conditions;
(2) Select the appropriate material specifications and models: according to the requirements of different types of traffic locks, select the corresponding materials and sizes to meet their bearing capacity standards;
(3) Ensure stability: use expansion screws and other means to strengthen the fixing effect, so as to avoid loosening or even falling of the equipment due to external force; At the same time, pay attention to waterproof and moisture-proof treatment to prolong the service life;
Fourth, the daily maintenance suggestions:
(1) Regularly check whether the connection parts are fastened undamaged, and repair or replace the accessories in time if any damage is found;
(2) Cleaning the dirt and sundries on the surface and keeping it clean and hygienic are beneficial to improve the aesthetics and reduce the corrosion risk;
(3) For easy-to-wear parts, such as springs and pull rods, lubricating oil should be regularly applied to enhance lubricity and fatigue resistance;
V. Conclusion
In a word, we should put the principle of "quality first" in the first place when implementing any construction of public facilities, and formulate reasonable management measures according to the actual situation to ensure its long-term effective operation. By learning and mastering the knowledge described in this article, I believe it can provide some help and reference value for everyone!
Rec. Prods.
标签：
本文地址：https://tepinji.com/Railway/3494.html