Operating handle of ship sewage treatment equipment

With the increasing awareness of marine environmental protection and the increasing requirements of the International Maritime Organization for marine discharge standards, the problem of sewage discharge from ships has gradually become one of the focuses of attention. As an important tool to treat domestic sewage on board, the operating handle of ship sewage treatment equipment is particularly important.

First, the function and structure of the operating handle

1. Function: The operating handle is the key component to control the start and stop of ship sewage treatment equipment, and its main function is to adjust the working state of the equipment to achieve the best treatment effect.

2. Structure: The operating handle usually consists of a handle, a rotating shaft, a gear and a transmission device, etc., and is provided with an indicator to facilitate the operation of the crew.

Second, the method of use

1. Be familiar with the operation process: read the equipment manual carefully before putting it into use, and understand the specific meaning of each function button and the correct working sequence;

2. Start the equipment: after turning on the power switch, turn the operating handle to the "start" position according to the predetermined program to start the sewage treatment process;

3. Monitoring operation status: During the operation of the equipment, it is necessary to pay close attention to the changes of various parameters (such as pressure gauge readings, flowmeter display values, etc.) to ensure that they are within the normal range;

4. Turn off the equipment: When it is necessary to stop or pause, just rotate the operating handle reversely to the corresponding position to realize quick shutdown.

Third, matters needing attention

1. Regular inspection and maintenance: the operating handle should be cleaned and maintained regularly to prevent dust and impurities from entering the interior and affecting the normal use performance;

2. Avoid misoperation: Do not change the setting mode at will without sufficient knowledge and experience, so as not to cause unnecessary damage;

3. Cooperate with other facilities to operate together: In order to ensure the smooth and efficient operation of the whole system, function keys linked with other auxiliary devices may be set on the operating handle, which must be used reasonably according to the requirements of the specification.

IV. Conclusion

In a word, a well-designed operating handle can not only simplify the tedious and complicated steps in the daily work of the crew, but more importantly, it can effectively improve the overall work efficiency and reduce the error rate. Therefore, it is very important for every ship to choose a high-quality and easy-to-use product!

标签：

本文地址：https://tepinji.com/metal/2812.html