Importance and Selection of Door Locks for plastic crusher Protection Doors

With the continuous improvement of the level of industrial automation, all kinds of mechanical equipment play an increasingly important role in the production process, and the safety problems among them have gradually become one of the focuses of people's attention. As an important equipment in the plastic processing industry-plastic crusher, while improving work efficiency, we need to pay more attention to its safety, and the door lock of plastic crusher protective door has become a key component to ensure the safety of personnel.

First, the significance of plastic crusher protective door lock.

1. Ensure the personal safety of the operator: In the process of using plastic crusher, once the machine breaks down or an accident occurs, the operator can quickly open the protective door for treatment or maintenance to avoid accidents.

2. Prevent irrelevant personnel from entering the dangerous area by mistake: Because plastic crusher will produce strong vibration and noise when working, and may produce dangerous factors such as splash, it is necessary to set up protective doors and install firm and reliable door locking devices.

3. Improve production efficiency and quality: when the staff can close the protective door smoothly after entering the crushing room to clean the material residue, the equipment can be restored to normal operation as soon as possible; On the other hand, if the door cannot be closed in time, the subsequent processes may be affected or even stopped for repair.

4. Comply with the requirements of relevant laws and regulations: According to the national safety standard GB/T 289372012, the mechanical protection design principle of mechanical and electrical safety, all machinery that may cause injury must be equipped with appropriate protective measures to protect users from the harm caused by direct contact.

Second, how to choose the right door lock correctly?

We need to consider the following aspects before purchasing plastic crusher protective door locks:

1. Lock material: generally made of high-strength aluminum alloy, with good corrosion resistance and wear resistance;

2. Opening mode: there are two common types to choose from: manual (including knob type and push-pull type) and electric type, which can be flexibly decided according to actual needs;

3. Installation position: usually place the door lock in a position that is easy to reach and does not affect the normal work, such as the lower part of the front center;

4. Frequency of use: If it is opened frequently, it is recommended to use durable products, otherwise, it only needs ordinary styles to meet daily needs;

5. After-sales service: Give priority to the cooperation of manufacturers with high brand awareness and good word-of-mouth evaluation, so that not only the product quality is guaranteed, but also problems can be solved in time and effectively.

Third, the maintenance method

In order to ensure that the door lock is always in good condition and prolong its service life, it is very important to check and clean it regularly:

1. Remove stains: use a clean and soft rag to dip a proper amount of alcohol to wipe the surface residue until it disappears completely;

2. Check the screw tightness: turn the key frequently to see if it is smooth and unimpeded, and make sure that all connection parts are firmly fixed;

3. Replace damaged parts: once some parts are found to be badly worn and beyond repair, they need to be replaced with new spare parts immediately to avoid affecting the overall performance.

To sum up, choosing the appropriate specifications of plastic crusher protective door locks plays an irreplaceable role in enhancing corporate image, reducing accident rate and enhancing employee satisfaction. At the same time, we should also pay attention to daily maintenance and management, so as to better play the great value contained in these small objects!

标签：

本文地址：https://tepinji.com/gsxw/2814.html