Installation skills and case sharing of furniture locks
In home life, in order to ensure property safety and privacy protection, many families choose to install locks on important furniture such as drawers and wardrobes. However, in the actual installation process, many people often fail to proceed smoothly because of lack of relevant knowledge. This paper will introduce the installation skills of furniture locks in detail, and help you to complete this work better through some practical cases.
First, understand the types of locks
Before the formal installation, we should first understand several common types of furniture locks in the market and their characteristics: 1) surface-mounted type: simple structure, easy to disassemble and replace; 2) concealed type: good concealment, not easy to be pried open; 3) Magnetic attraction type: it is directly fixed to the metal surface by magnetic force without punching holes.
Second, the measurement size and preparation tools
Determine the position and size of drilling or cutting according to the purchased lock model. At the same time, prepare common tools such as electric drill, screwdriver and tape measure.
III. Detailed explanation of operation steps
1. Surface mounted lock installation:
(1) After confirming the position to be installed, mark it with a pencil;
(2) Adjust the direction of the base according to the requirements of the manual and fix it by self-tapping;
(3) Press the lock body gently into the base to complete the assembly. (Be careful not to push too hard)
2. Installation of concealed lock:
(1) firstly, measure the thickness of the door plate and the distance from the center of the handle, and then draw the corresponding shape accordingly;
(2) cutting the door hole along the wire cutting with a chainsaw or a manual plane;
(3) Put the lock cylinder into the slot, put the gasket on the other side and tighten the screw.
3. Installation of magnetic lock:
This kind of products are usually suitable for products made of iron materials, just find the right position and paste it.
Fourth, matters needing attention
1. Before any type of installation, please make sure that you are familiar with all necessary information and instructions;
2. If you don't have enough skills or experience, you'd better seek professional help;
3. Don't forget to check whether all parts are intact, otherwise it may affect the final effect;
Remember to test it several times after completion to ensure that it can run normally and there are no problems.
V. Case analysis
Suppose you want to add a concealed lock to your wooden wardrobe now, then the specific process is as follows:
1. First, draw the corresponding graphic outline according to the thickness of the door panel and the distance between handles;
2. Use a suitable tool to slowly cut the space along the edge;
3. Place the lock core and put on the washer and tighten the screw from the other side until it is firm;
Finally, try to turn it on and off several times to see if there is any abnormal sound or other abnormal situation.
To sum up, as long as you master the correct method and execute each step patiently and carefully, even novices can easily fix all kinds of small hardware on furniture!
Rec. Prods.
标签：
本文地址：https://tepinji.com/furniture/2240.html