Maintenance and cleaning methods of furniture locks
I. Preface
In our daily life, we often neglect the maintenance of furniture locks, which shortens their service life and even affects home safety. Therefore, it is very necessary to maintain and clean furniture locks regularly.
Second, the maintenance method of furniture locks
1. Avoid external impact: Do not impact or knock the lock body hard to avoid damage to internal parts.
2. Keep a dry environment: avoid water or other liquids directly contacting the lock cylinder to prevent rust and corrosion.
3. Use special lubricant: spray the special lubricant into the lock hole once every three months or so, which can increase flexibility and reduce wear.
4. Check fasteners regularly: For furniture locks installed on doors, it is necessary to tighten the fixing screws at regular intervals to prevent them from loosening.
Third, the cleaning method of furniture locks
1. Wipe the dust on the surface with a dry cloth: clean and soft dry cloth can be used to gently wipe off dirt and impurities on the lock surface.
2. Eraser to remove oxide layer: If there are slight scratches or spots, you can try to wipe gently with an eraser to remove the surface oxide layer.
3. Clean up the dirt in the gap with a small brush: use a small brush or a soft toothbrush to go deep into the lock seam to remove small particles of dust and sundries that are difficult to reach.
4. It is not recommended to clean with water: although some materials such as stainless steel products have good water resistance, in order to avoid residual moisture entering the mechanical structure and causing failure, please try not to use this method.
IV. Conclusion
Through the above introduction, we can know that proper maintenance and cleaning of furniture locks can not only prolong their service life, but also improve safety and aesthetics. I hope everyone can pay attention to it and put it into practice!
Rec. Prods.
标签：
本文地址：https://tepinji.com/furniture/1091.html