Maintenance and service life extension of casing lock
As one of the important parts in industrial production, the quality of casing lock directly affects the overall running state and working efficiency of mechanical equipment. Therefore, regular scientific and reasonable maintenance work plays a vital role in improving the efficiency and prolonging the service life of casing lock.
First, cleaning is the key.
Because the casing lock is often in a dusty and harsh working environment, it is easy to accumulate a lot of oil and impurities, thus affecting the normal use effect. Therefore, it is necessary to clean the casing lock regularly. In the cleaning process, the floating dust on the surface should be cleaned with a soft brush first, then carefully scrubbed with special detergent and water, and finally blown clean with dry cloth or compressed air. It should be noted that when disassembling the casing lock, handle it with care to avoid collision and damage to internal parts; At the same time, try not to use high-pressure water gun to directly flush, so as not to cause mechanical damage.
Second, lubrication and maintenance can not be less
In order to ensure the flexible operation of the casing lock and reduce the occurrence of wear, it is necessary to add a proper amount of lubricating oil according to the actual situation, and it is necessary to replace new oil products every once in a while. Usually, synthetic grease with good viscosity index and high temperature resistance can be selected to achieve good protection effect; If conditions permit, we can also try to use high-grade products containing trace element additives such as molybdenum to further improve the anti-corrosion ability.
Third, regular inspection is very important.
In addition to the above two points, it is necessary to conduct comprehensive and detailed detection and troubleshooting of casing locks on a regular basis. If abnormal phenomena are found, effective measures must be taken immediately to repair or replace them, otherwise it will bring serious consequences to the whole system. Specifically, it includes but not limited to the following aspects:
1) Observe whether there is deformation and fracture, etc.
2) Measure whether the gap size meets the required range;
3) Listen to the sound to judge whether there is abnormal sound;
4) Check the looseness of fasteners, etc.
Only through these routine operations can we find out the problems in time and solve them pertinently, so as to avoid further losses caused by negligence.
Fourth, correct installation is the foundation.
Although the above three points are very important, nothing can be discussed without a good initial condition. Therefore, during the initial assembly process, relevant operations must be carried out in strict accordance with the instructions in the manual provided by the manufacturer, including adjusting the distance relationship between parts and fixing methods, etc. Only in this way can all subsequent steps be carried out smoothly and the long-term stable operation goal be finally achieved.
To sum up, as a kind of high-precision mechanical parts, casing lock really needs to put a considerable amount of energy into various maintenance and management work in the practical application process. Although it may be a little cumbersome in the short term, it is definitely worth it in the long run!
Rec. Prods.
标签：
本文地址：https://tepinji.com/Machi/580.html