With the progress of science and technology and the development of smart home, more and more families begin to use fingerprint lock as a part of the access control system to improve the safety and convenience of the family. It is very important to choose the installation position of fingerprint lock correctly and master certain installation skills to ensure its normal work. This paper will introduce it in detail from the following aspects.
First, the choice of installation location
1. Door material: The first thing to consider is the material of the door itself. For wooden or metal doors, fingerprint locks can usually be installed directly on the doors; If it is a glass door, you may need to choose a special model specially designed for this kind of door.
2. Safety considerations: In order to prevent thieves from entering the room by destroying the lock, when choosing the installation location, try to avoid places that are easy to be violently disassembled. For example, avoid installing it in a position directly exposed at the crack of the door to prevent it from being easily pried open.
3. Easy-to-operate height: Considering the convenience of daily use, it is recommended to set the fingerprint identification module at a height that is convenient for adults to use and not too high for children to reach (generally about 1 meter to 1.2 meters from the ground).
4. Waterproof and dustproof performance: If the fingerprint lock is used outdoors or in a humid environment, you need to pay attention to the waterproof grade of the product and choose a location that can reduce the risk of rainwater intrusion for installation.
Second, the installation skills
1. Adequate preparation:
Before the formal construction, please read the product manual carefully and prepare the required tools (such as electric drill, screwdriver, etc.);
Make sure that there are no wires or other obstacles in the selected location that affect the installation process.
2. Accurate measurement and positioning:
Use a ruler or level to determine the accurate center point and vertical line, and mark the position where holes need to be punched;
For some complex models, templates may be needed to assist in positioning.
3. Steady and firm fixation:
Select appropriate expansion bolts/self-tapping screws for fastening according to different wall materials;
Keep the handle balanced and not inclined during installation, so as not to affect the normal use effect.
4. Adjust and optimize the details:
After the initial assembly, it is necessary to check whether the components are tightly connected without looseness, and fine-tune the angle deviation;
Finally, the whole installation process can be regarded as completed only after the power-on test is carried out to confirm that all functions can operate normally.
In short, although there are many different types and brands on the market for consumers to choose from, no matter which product they choose, they must pay attention to the planning and deployment work at the initial stage-only by choosing a reasonable location can they give full play to their due effectiveness. I hope the above content will help you!
Rec. Prods.
Tags：
Addresses：https://tepinji.com/Machi/3367.html