Troubleshooting and solution of lever lock
In daily life, lever lock, as a widely used safety facility, can be seen everywhere in offices, families, schools and other places. However, with the increase of frequency of use and the passage of time, some minor problems will inevitably occur in the lever lock, which requires us to master certain troubleshooting methods and solutions for the lever lock.
A, common faults and cause analysis:
1. Lock core jam: As one of the key components of lever lock, the lock core's main function is to realize the rotation of the key and drive the internal lever mechanism to complete the unlocking action. If the lock hole is not cleaned for a long time or is affected by dust and impurities, the lock core will be stuck and its normal use will be affected.
2. The key can't be inserted: sometimes we find that the key can't be inserted into the lock hole at all, which may be because foreign objects in the lock hole prevent the key from entering; Or the key itself is damaged and deformed, which makes it impossible to insert it smoothly.
3. Loose door handle: The door handle is prone to loosening during use, mainly because the fixing screws are not tightened or worn out.
4. Lever failure: When the door handle is pressed, if the door cannot be opened normally, it means that there is a problem with the lever device, which is usually caused by spring fatigue failure.
Second, the specific measures for troubleshooting:
1. Clean the keyhole: firstly, wipe the dust around the keyhole with a soft cloth, and then use a slender tool (such as a toothpick) to remove the impurities in the keyhole. Regular maintenance of this kind can effectively avoid the sticking phenomenon caused by dust blockage.
2. Replace keys: for keys that are seriously damaged or even broken, new supporting products should be replaced in time to ensure normal use;
3. Tighten the screws: determine the loose part of the door handle through observation and use a wrench or screwdriver with corresponding specifications for reinforcement;
4. Adjust the lever mechanism: remove the lower cover to see if the spring is in good condition. If it has lost its elasticity, you need to find a professional to help replace it with a new one. In addition, it is necessary to check whether other joints are damaged.
Iii. Suggestions on preventive measures:
In order to reduce the possibility of lever lock failure, we can take the following ways to maintain the equipment:
1. Regularly clean the surface and internal structure of the lock to maintain a good sanitary environment;
2. Use original genuine accessories to ensure stable and reliable quality;
3. Avoid frequent switching operations and try to slow down the mechanical wear speed;
4. When abnormal sound is found, find out the reason as soon as possible and repair it to prevent further deterioration.
In a word, correctly identifying and dealing with various faults of lever lock can not only help users quickly solve problems and restore normal life order, but also help to prolong the service life of equipment and reduce maintenance costs. I hope everyone will pay attention to the attention and nursing degree of small mechanical equipment such as lever lock in their daily management!
Rec. Prods.
标签：
本文地址：https://tepinji.com/Machi/3209.html