Maintenance and maintenance precautions of magnetic lock
With the development of science and technology and the popularization of intelligent equipment, magnetic lock, as a new type of access control system, is gradually widely used in various places. However, in the process of use, if there is no effective maintenance, it may cause failure or shorten the service life. Therefore, this paper will elaborate the maintenance and maintenance precautions of magnetic lock in detail.
I. Regularly clean the dust and sundries on the surface of the magnetic lock.
Because the magnetic lock is usually installed in the outdoor environment, it is easily eroded by rain, dust and other substances, resulting in its appearance damage or dysfunction. In order to keep it in good working condition, it is necessary to wipe the surface of the magnetic lock frequently and dry it with clean and soft cloth. In addition, in case of rain and snow, it is necessary to remove the water droplets and snow in time to avoid rust and corrosion.
Second, check whether the fasteners are loose and fastened.
With the passage of time and the influence of frequent opening and closing actions, the screws inside the magnetic lock may loosen, which will affect the stability and safety of the overall structure. Therefore, it is suggested that every once in a while (for example, once every six months), we should carefully check whether all the connecting parts are firm and reliable, and if necessary, we can add some rubber pads or adopt higher quality materials to enhance the anti-vibration performance.
Third, replace aging damaged parts to ensure normal operation.
After long-term use in harsh environment, it is inevitable that some parts will be seriously worn or even completely scrapped and cannot be used any more. For this kind of problem, the service life of the whole system can be effectively extended by regularly checking the working state of each component and replacing those products that have obviously aged and deformed in time. It is worth noting that when purchasing replacement products, it is best to choose products with the same model and excellent quality produced by the original factory to ensure high matching and not cause other potential risks.
Fourth, adjust the current size to meet the requirements and standards
As one of the ways to realize locking and unlocking based on the principle of electromagnetic effect, magnetic lock needs to control the length of power-on reasonably to achieve the best effect. This means that the user should flexibly adjust the preset parameters on the circuit board according to the actual needs to achieve the purpose of stabilizing the output current within the ideal range. However, it should be noted that this task is best left to professionals to avoid losses caused by misoperation.
The above is the relevant introduction about "maintenance of magnetic lock"! I hope readers and friends can get useful information from it and deal with these problems correctly in their future lives ~
Rec. Prods.
标签：
本文地址：https://tepinji.com/Machi/2917.html