Discussion on the importance and application of door lock in constant temperature and humidity test box

I. Introduction

With the rapid development of science and technology, environmental simulation experimental equipment has become an indispensable part of scientific research and product testing. Among them, the constant temperature and humidity test chamber, as a kind of environmental simulation equipment, is widely used in industrial manufacturing, aerospace, material science and other fields. The design and performance of its door lock also directly affect the test results and personnel safety.

Second, the characteristics of constant temperature and humidity test box

1. Wide temperature range: it can change from extremely low temperature (70°C) to higher temperature (200°C);

2. Accurate humidity control: the humidity is usually adjusted between 20% RH and 98% RH, and the accuracy of 3% RH is guaranteed;

3. Adopt advanced control system to ensure uniform distribution of temperature and humidity;

4. It has a variety of protection functions such as over-temperature power failure to ensure the safety of use.

Third, the requirements for the door lock of the constant temperature and humidity test box

Due to the special and complicated internal environment of the constant temperature and humidity test chamber, the following points need to be fully considered in the design:

1. Sealing: In order to keep the internal stable temperature and humidity conditions, the box is required to have good air tightness and water tightness, so the door lock must have excellent sealing ability to prevent the infiltration of external air or moisture.

2. Convenient operation: Considering the convenience requirements in practical application scenarios, the door lock should be simple and easy to use, which is convenient for quick opening and closing operation.

3. Durability and reliability: Long-term exposure to high temperature and high humidity can easily lead to problems such as corrosion and damage of mechanical parts, so it is particularly important to choose door locks with excellent materials and strict anti-corrosion treatment.

4. Emergency opening device: It is very important to open the door quickly to escape in case of emergency (such as fire).

Four, commonly used types and their advantages and disadvantages analysis

At present, the common door locks of constant temperature and humidity test boxes on the market are mainly manual and electric:

1. Manual-simple structure and low cost; However, there is a high risk of human error and it is difficult to meet the needs of high-standard laboratories;

2. Electric type-the automatic closing and unlocking process is completed by motor driving; Compared with the former, it is more intelligent, convenient and efficient, and it also effectively avoids a series of problems brought by traditional methods.

V. Case sharing

A high-performance constant temperature and humidity test chamber produced by a well-known enterprise adopts electric door lock technology, and its main features are as follows:

Made of high-quality stainless steel, the surface has been specially treated, which has excellent corrosion resistance and wear resistance;

Built-in precision sensor monitors the pressure change in the box, and when it exceeds the preset value, it will immediately trigger an emergency mechanism to bounce the door open;

Equipped with independent power supply system, it can work normally for at least 6 hours even if the main power supply is interrupted, providing users with more reliable safety guarantee;

VI. Conclusion

To sum up, a stable and reliable door lock system is absolutely one of the essential parts for any high-quality constant temperature and humidity test chamber. Only in this way can we better ensure the authenticity and accuracy of the experimental data and the life and property of the staff are not threatened!

标签：

本文地址：https://tepinji.com/Machi/254.html