Electrically lockedMaintenance and troubleshooting methods

I. Preface

With the development of science and technology and the improvement of intelligence, various electronic devices are widely used in people's lives. Among them, as one of the important components of smart home, electric lock has also been favored by more and more consumers. However, due to the complex and changeable use environment and other factors, some faults will inevitably occur in the use of electric locks. In order to ensure its normal operation and prolong its service life, it is necessary to check and maintain the electric lock regularly.

Second, the daily maintenance measures

1. Cleaning and maintenance: always use a soft cloth to wipe the foreign bodies such as dust and impurities on the surface to prevent damage caused by wear;

2. Sealing and waterproof treatment: pay attention to moistureproof and corrosion protection, so as to avoid short circuit burning caused by rain or humid air invading the internal circuit board;

3. Regularly check whether the power supply voltage is stable to ensure that the motor can work normally without overheating;

4. Replace the battery or charger in time to avoid affecting normal use due to insufficient power;

5. During installation, operate in strict accordance with the requirements of the manual, and do not arbitrarily change the line layout to avoid potential safety hazards.

Three, common fault analysis and its solutions

(1) Unable to open/close:

Cause analysis: The battery may be dead or there is something wrong with the induction module.

Solution: First, check whether there is enough power to support the continuous operation. If there is no problem, try to restart the system to see if it can return to normal. If it still doesn't work, you need to take it apart to see if there is any poor contact between the components, and finally find a professional to help repair it.

(2) Error in reading the key card:

Cause analysis: It may be caused by serious signal interference or defects in the card reader itself.

Coping strategies: First, try to avoid other wireless communication devices such as mobile phone Bluetooth headsets to reduce the influence of external factors on communication quality; Secondly, the recognition effect can be improved by adjusting the distance; I really can't. I just have to contact the after-sales staff for on-site service!

(3) the mechanical structure is stuck:

Cause analysis: Long-term non-use makes lubricating oil dry and harden, which hinders the smooth operation of moving parts.

Solution: At this time, it can be easily done by adding a proper amount of lubricant. However, attention should be paid to choosing the appropriate type of oil, otherwise it may be counterproductive and cause more serious consequences.

In short, for such high-tech products, it is very important to take preventive maintenance measures scientifically and reasonably! I hope the above introduction can provide some reference value for everyone!

标签：

本文地址：https://tepinji.com/Machi/2031.html