position:home > Industries > Machinery

Matters needing attention in installation of office lock

source: time:2024-12-12 hot:0

Matters needing attention in installation of office lock

With the development of economy and the progress of science and technology, people pay more and more attention to the safety of office. As one of the important facilities to ensure safety, office door locks need to pay special attention to the following points during installation.

First, choose the appropriate lock type

First of all, we need to choose the appropriate lock types according to our own needs. At present, there are different types of mechanical locks, electronic coded locks and so on. The advantages of mechanical lock are low price and strong durability; The electronic password lock is more convenient and intelligent. Of course, we can also consider the advantages and disadvantages of the two in combination with the actual use before purchasing.

Second, ensure that the door frame thickness is sufficient.

Generally speaking, the thickness of office doorframes should be more than 35mm to ensure the smooth installation of various types of locks. If the door frame is found to be thin, reinforcement measures should be taken in advance or new doors with appropriate thickness should be replaced to prevent problems in the later use due to insufficient load bearing.

Three, check the door lock hole size is accurate.

In order to ensure that the newly bought lock can be installed on the door smoothly, it is best to measure the size of the old lock hole on the door of your office before buying and record it for subsequent reference; At the same time, it is also necessary to confirm whether the specifications of the new lock are consistent with the original ones. If there is any error, it should be fed back to the manufacturer in time to ask for a replacement product to avoid the occurrence of abnormal use.

fourAccording to the correct steps, construction operation

1. Remove surface impurities: firstly, clean all dust, dirt and other foreign matters at the selected position;

2. Positioning marking: align the position of the new lock body and handle according to the measured data in advance, and mark the corresponding position with a pencil;

3. Slotting and punching: use tools such as electric drill or chisel to cut various grooves and threading holes required by the door lock according to the positions marked on the drawings;

4. Assemble parts: after tightening the fixing screws, assemble other accessories such as spring leaf, positioning block and panel in turn to complete the assembly process;

5. Connection circuit: If you choose intelligent products, you need to connect power cables and set various parameters;

V. Test whether the function works normally.

The last step is to start the trial operation mode to see whether all the function keys can respond flexibly, whether the indicator light is in normal state, whether the battery power is sufficient, and so on, and then put them into use formally, and maintain them regularly to avoid potential safety problems.

Six, after the installation is completed, do a good job of cleaning.

After all the installations are completed, the remaining debris and garbage should be completely removed, and the entire surface of the lock should be wiped with a dry cloth to maintain its beauty and prolong its service life!

In a word, office door lock is of great significance for improving the security of office environment. Only by following these principles can we achieve the expected effect better! I hope this article can help you successfully complete the installation task and enjoy a more comfortable and comfortable workplace life!


Rec. Prods.


标签:

本文地址:https://tepinji.com/Machi/1950.html