Deep Analysis —— Safety Mechanism of Miter for Protecting Door Locks
With the improvement of people's quality of life and the enhancement of health awareness, the mite remover has gradually become one of the common cleaning tools in modern families. However, in the process of use, some specially designed mites (such as products with protective doors) need the correct operation of users to ensure their normal use and safe operation, among which "door lock of protective doors" is an important part.
1. What is the door lock of the acaricide protection door?
The so-called door lock of mite-removing instrument protection door refers to a mechanical structure device installed inside or outside some types of mite-removing instruments, and its main function is to prevent users from causing accidental injuries due to misoperation when opening or closing the machine.
Second, the working principle of the door lock of the mites protection instrument
Usually, this type of door lock will use electronic induction or physical locking to control the opening and closing state of the door body. Specifically:
1. When the mite control instrument is in the normal working mode (i.e., it is performing the dust collection task), if you try to open the protective door manually, the electromagnet will generate strong attraction to close the door tightly because the sensor in the door detects the current working state signal; On the other hand, it can be turned on smoothly when the equipment is stopped.
2. For the physical way, it is relatively simple and direct: that is, the movement path of the door leaf is limited by setting a buckle and other mechanisms, and the lock can be released and allowed to move freely only after pressing a specific button/handle.
Third, how to correctly maintain the door lock of the mite remover?
In order to ensure that the mites can serve us stably and efficiently for a long time, and to avoid the occurrence of safety accidents due to negligence, it is recommended to check the following items regularly:
1. Regularly clean the dust and sundries attached to the surface,
So as not to affect the sensitivity and service life;
2. Confirm that the connection between the components is firm and free from looseness;
3. Check the circuit board for obvious damage;
4. If problems are found, timely repair and replace new parts.
Fourth, summary
To sum up, it can be seen that the little detail of "door lock for door protection with acaricide" actually contains a very important functional value-it not only effectively protects the personal and property safety of consumers, but also greatly enhances the technical content and quality image of the products themselves, so it deserves the common attention of manufacturers and consumers!
Rec. Prods.
Tags：
Addresses：https://tepinji.com/Machi/1111.html