Bathroom, as one of the places with high frequency of use at home, is vulnerable to the influence of water vapor and humidity, resulting in different degrees of aging or damage. Among them, the bathroom door lock is more prone to problems due to frequent contact with moisture and frequent opening and closing. Therefore, it is very necessary to maintain and clean the bathroom door lock regularly. This article will introduce the daily maintenance and cleaning methods of bathroom locks for you in detail.
I. Daily maintenance
1. Avoid collision with hard objects: Try to avoid striking hard or scraping the door lock surface with hard objects to avoid scratches or damage.
2. Use special key: It is recommended to use the original key to unlock the lock, so as to prevent the wear of the key from affecting the normal use; If you want to copy the key, please choose a regular hardware store to copy it and ensure the quality of the key.
Good quantity.
3. Turn the handle gently: be gentle when opening the door, and don't push and pull the handle violently, so as not to cause the internal parts to loosen and fall off.
Second, regular inspection
1. Check whether the screws are tightened: check whether the fixed screws are tightened in place at least once a month to prevent failures caused by loose screws;
2. Observe whether the appearance is abnormal: at ordinary times, pay attention to observe whether the lock body and surrounding accessories such as handles are rusted and stripped, and handle the problems in time;
3. Test whether the function is normal: irregularly test the functional status of each part of the mechanism (such as push-button electronic lock) to ensure the smooth start and close.
Third, solutions to common problems
1. Poor switch: When it is found that the door lock is difficult to open, you can try to apply a small amount of lubricating oil to the key joints to help improve flexibility;
2. Keyboard failure: For intelligent products with numeric keyboards, if you can't unlock them after entering the password, it may be caused by the exhaustion of the battery. At this time, you only need to replace the new battery to resume normal operation;
3. Incorrect password: If you forget the set initial password, you can restore the factory settings and reset the password by looking at the reset steps in the manual.
Fourth, cleaning skills
1. Storage in dry environment: In order to reduce the risk of moisture erosion, it is best to put the removed old locks in a well-ventilated place and dry them naturally before subsequent operations;
2. Use mild solvent to wipe: use a soft cloth dipped in a little neutral detergent to gently wipe the metal surface to remove oil and dust, and do not wash it directly with water, otherwise it will accelerate the corrosion rate;
3. Regular waxing protection: at least apply a thin layer of car wax to the outer layer of the whole lock every year to increase the moisture-proof and anti-corrosion ability.
The above is about how to do a good job in daily maintenance and cleaning of bathroom locks! By taking the above measures, the service life can be effectively extended and the safety performance can be improved. I hope it will help you!
Rec. Prods.
标签：
本文地址：https://tepinji.com/Machi/1060.html