Practical handbook of medical respiratory equipment
With the rapid development of science and technology and the progress of medical technology, medical respiratory equipment plays an increasingly important role in modern clinical medicine. They not only provide patients with necessary oxygen support, but also assist doctors in treatment, which greatly improves the survival rate of patients. However, how to use these complicated machines correctly has become a difficult problem. Today, we will discuss the practicability and operation skills of medical breathing equipment.
First, understand the types of medical respiratory equipment
Medical respiratory equipment can be roughly divided into two categories: non-invasive and invasive.
1. Non-invasive: oxygen is mainly delivered to the patient's respiratory tract through nasal mask or face mask, and there is no need to intubate the patient;
2. Invasive: a tube is placed in the trachea of the patient and connected to the mechanical ventilator to achieve the effect of forced ventilation. The two methods have their own advantages and disadvantages, so it is necessary to choose a suitable scheme according to the actual situation.
Second, familiar with the basic operation process
1. First of all, full preparations must be made before use, including checking whether the power supply works normally and confirming that all parameters are set accurately.
2. The next step is to install appropriate interface devices (such as masks) and fasten them in place;
3. Then turn on the power switch to start the equipment, and adjust the relevant parameter values according to the doctor's advice;
4. Finally, observe the changes of readings on the display screen to ensure that everything runs well.
Third, master common troubleshooting methods
1. If the screen is not bright or the display is abnormal, it may be caused by poor line contact. Please try unplugging the connection again.
2. When encountering problems such as excessive/slow breathing frequency, stop using it immediately and contact professional maintenance personnel for treatment;
3. In addition, pay attention to cleaning the filter regularly and replacing the filter element to prevent the risk of infection caused by bacterial growth.
Fourth, matters needing attention:
1. Be especially careful during the operation to avoid the system disorder caused by touching important keys by mistake.
;
2. Be sure to turn off the main switch and unplug the power cord after use to prevent safety accidents;
3. Conduct comprehensive inspection and maintenance of the whole system on a regular basis to ensure that it is always in the best state.
In a word, the practical manual of medical respiratory equipment aims to help medical staff use all kinds of advanced equipment more skillfully to carry out efficient diagnosis and treatment activities, and at the same time remind everyone to strictly abide by safety norms and reduce the probability of accidents. I hope every reader can benefit a lot from it!
Rec. Prods.
标签：
本文地址：https://tepinji.com/Equip/3302.html